After building the staircase for the left side. I thought I'd make one for the right side. I built it the same way as the other, only configured it in a offset design.

Next is a pic of the wall from the Boardwalk side.

By now I'd come up with the Idea of doorways on the back and side. But since the boardwalk would be to narrow for an extended opening. I decided to make a balcony to widen it.

Then the doorway with a couple of steps and a double doorway on the right side.

Add the back and another doorway for the left side.

Not to be one to leave things alone. I get another Idea(sounds scary don't it) to give depth to the openings. I'd cut them out, extend them and run a kinda channel up to the Lightbox. That way the light could run down the back and Illuminate the doorways.

Then add the back of Watto's Box and begin a mockup. I do these often to see where I am, and if I want to change anything before proceeding. These at times can require lotsa clamps.

Now it's time to mount jabba's box. First trace the back openings to be cut out. I cut them out using my newest cool tool, a Rotozip!!! Noisy but awesome. Clamp, screw and sand the openings flush.

Frame in the Light Channel, and add the luan sides.